A post-construction termite barrier can fail if it is bridged by landscaping, installed incomplete, or not followed up with inspections. The most common cause is bridging, where garden beds, mulch or paving give termites a path past the treated zone. Priority Pest Services installs a complete barrier and advises on what to avoid afterwards, so the protection lasts. An annual inspection catches any gaps early.
- Bridging by landscaping is the most common cause of barrier failure
- An incomplete install leaves gaps in the treated zone
- Skipping inspections means bridging can go unnoticed
- Keep soil and mulch clear of the slab edge after installation
Risk 1: bridging by landscaping
The most common reason a post-construction barrier fails is bridging. Garden beds, mulch, retaining timbers or paving built against the slab edge give termites a hidden path past the treated zone. After installation, keep soil and mulch well clear of the foundation.
| Landscaping choice | Risk to the barrier |
|---|---|
| Garden beds against the slab | High, can bridge the treated zone |
| Mulch near the foundation | High, gives termites cover |
| Retaining timbers on the slab edge | Medium to high |
| Clear gap at the slab edge | Low, keeps the barrier visible |
Risk 2: an incomplete install
A barrier only works if the treated zone is continuous. Skipping a section to save time, or not drilling where paths meet the slab, leaves a gap termites can use. A complete install covers the full perimeter and subfloor where accessible. Read our guide on what happens during installation to see what a complete job involves.
Risk 3: no follow-up inspections
A barrier is not fit and forget. Even a complete install can be bridged later by renovations or new landscaping. Without annual inspections, bridging can go unnoticed until termites are already inside. Read our guide on how often to book a termite inspection to plan your schedule.
"The barrier is only half the job. The other half is keeping the slab edge clear and inspecting every year so any bridging is found early."
Risk 4: choosing the wrong method
Not every home suits the same method. A home with poor access or a difficult subfloor may need a different approach than a standard build. An inspection confirms the right method for your construction. Compare the options in our guide on chemical vs physical termite barriers.
How to keep the barrier working
- Keep the slab edge clear of soil, mulch and garden beds after installation.
- Book annual inspections to catch any bridging early.
- Tell us before renovations or landscaping near the foundation.
- Keep the installation paperwork for your records and future inspections.
See our post-construction termite barrier service for what a complete install covers, or contact Priority Pest Services to arrange an inspection. Not sure if your home suits one? Read our guide on whether a post-construction barrier suits your home.
We install post-construction termite barriers in the Hills District, post-construction termite barriers in the Northern Beaches and post-construction termite barriers in the Sutherland Shire, as well as every other part of Greater Sydney.
Key tips to protect your barrier
- Keep the slab edge clear of soil and mulch after installation.
- Book annual inspections to catch bridging early.
- Use a complete install that covers the full perimeter.
- Keep the paperwork for your records.
Want a barrier that lasts?
Priority Pest Services installs complete post-construction termite barriers in Sydney and advises on how to keep them working. Call us or request a free quote online to book today.
Frequently Asked Questions
What causes a post-construction barrier to fail?
The most common cause is bridging, where garden beds, mulch or paving give termites a path past the treated zone. An incomplete install or no follow-up inspections also leave gaps.
Can a barrier be bridged by landscaping?
Yes. Garden beds, mulch or retaining timbers built against the slab edge can bridge the treated zone. Keep soil and mulch clear of the foundation after installation.
How do I know the barrier is complete?
A complete barrier forms a continuous treated zone around and under the home. We record what was installed and where, and annual inspections check for any gaps or bridging.
Is it risky to drill through my paths?
No, when done by a licensed technician. We drill small holes only where needed and seal them after. We show you where we will drill before we start.
Can I skip inspections if I have a barrier?
No. A barrier and inspections work together. Without annual inspections, bridging can go unnoticed until termites are already inside.
