Call 0466 344 445
    Back to blog
    November 17, 2026

    Is a post-construction termite barrier suitable for your Sydney home?

    Technician treating the perimeter of a Sydney home with a residual spray

    A post-construction termite barrier suits many existing Sydney homes that were built without protection or whose old barrier has expired. It is installed by drilling and injecting around the foundation and trenching the subfloor to create a treated zone termites cannot cross. An inspection first confirms whether it suits your construction and access. Priority Pest Services recommends the right method and gives you a fixed quote before any work starts.

    • A post-construction barrier suits existing homes with no barrier or an expired one
    • It works on concrete slab homes by drilling and injecting around the slab edge
    • It is a common next step after termite treatment to stop future colonies
    • An inspection confirms the right method and access for your home

    Who benefits most from a post-construction barrier?

    A post-construction barrier is worth considering if any of the following apply to your home.

    Situation Why a barrier helps
    Built without a barrier Your home has no protection against foraging termites
    Old barrier expired Chemical barriers lose effectiveness over time
    After termite treatment Stops future colonies entering once the current one is gone
    High-risk area Near bushland or mature trees increases termite pressure

    Not sure if your home needs one? Read our guide on whether your home needs a termite prevention barrier.

    Does it work on a concrete slab home?

    Yes. For a home on a concrete slab, we drill and inject around the slab edge and through adjoining paths or patios to create a continuous treated zone. Where soil is exposed, we trench along the foundation and flood the subfloor with chemical. See our post-construction termite barrier service for the full process.

    Is it suitable after termite treatment?

    Yes. If you have had termites treated, a post-construction barrier is the logical next step. The treatment removes the current colony, and the barrier stops future colonies entering. Read our guide on what happens during termite treatment for the steps before a barrier is installed.

    "A barrier is not just for new builds. Most existing Sydney homes can be protected with a post-construction barrier if access allows."

    How is suitability confirmed?

    An inspection checks your construction type, the access around the foundation, the soil and any existing barrier. From there we recommend drill-and-inject, trenching or a combination, and give you a fixed quote. Compare the approach with a physical barrier in our guide on chemical vs physical termite barriers.

    What about paths and tiles?

    We drill small holes only where needed and seal them after treatment. We show you where we will drill before we start, so there are no surprises. Read our guide on what happens during a post-construction barrier installation for the detail.

    Do you still need inspections?

    Yes. Inspect at least every 12 months to make sure the barrier has not been bridged by garden beds, paving or renovations. Read our guide on how often to book a termite inspection to plan your schedule.

    We install post-construction termite barriers in the Hills District, post-construction termite barriers in the Northern Beaches and post-construction termite barriers in the Sutherland Shire, as well as every other part of Greater Sydney.

    Key tips to decide if it suits your home

    • Book an inspection to confirm construction and access.
    • Ask about drill-and-inject if you have concrete paths around the slab.
    • Consider it after termite treatment to stop future colonies.
    • Keep up annual inspections after the barrier is installed.

    Not sure if a post-construction barrier suits your home?

    Priority Pest Services inspects your Sydney home and recommends the right post-construction barrier method. Call us or request a free quote online to book today.

    Call 0466 344 445 Get a free quote

    Frequently Asked Questions

    Can any existing Sydney home get a post-construction barrier?

    Most can. The method depends on access and construction. An inspection confirms whether your home suits drill-and-inject, trenching or a combination, and gives you a fixed quote.

    Does it work on a concrete slab home?

    Yes. We drill and inject around the slab edge and through adjoining paths to create a continuous treated zone under and around the slab.

    Is it suitable if I have had termites before?

    Yes. A post-construction barrier is a common next step after termite treatment to stop future colonies entering your home.

    Will drilling damage my paths or tiles?

    We drill small holes only where needed and seal them after treatment. We show you where we will drill before we start so there are no surprises.

    Do I still need inspections with a post-construction barrier?

    Yes. Inspect at least every 12 months to make sure the barrier has not been bridged by garden beds, paving or renovations.