Call 0466 344 445
    Back to blog
    November 17, 2026

    What is included in a termite inspection in Sydney?

    Termite mud shelter tubes running up a brick foundation wall

    A termite inspection in Sydney covers every accessible area where termites could enter or hide. That includes the interior, exterior, roof void, subfloor and garden. The technician uses moisture detection and visual checks, then gives you a written report with findings, risk areas and recommendations. A thorough inspection is the only way to find termites before they cause structural damage.

    • A termite inspection checks the interior, exterior, roof void, subfloor and garden
    • Moisture detection finds hidden activity behind walls and skirting boards
    • You receive a written report with findings, risk areas and next steps

    What areas does a termite inspection cover?

    A proper inspection is a full check of the property, not a walk through the living areas. Priority Pest Services inspects the following areas where they are accessible.

    Area What is checked
    Interior Walls, skirting boards, door frames, wet areas and accessible timber
    Roof void Framing, bearers, joists and any signs of activity or moisture
    Subfloor Piers, stumps, bearers and joists where access is safe
    Exterior Slab edge, brickwork, weepholes and the perimeter of the building
    Garden Fences, retaining walls, trees, stumps and garden beds near the house

    Skipping any of these areas leaves a gap. Termites often enter through the subfloor or roof void, so an inspection that ignores them is not a termite inspection.

    What tools does the technician use?

    A licensed technician uses more than a torch. The standard tools include:

    • Moisture meter: Detects damp areas behind walls and skirting boards where termites may be active.
    • Thermal imaging (where used): Helps spot temperature differences that can indicate activity.
    • Probing tool: Taps timber to find hollow or damaged sections.
    • Torch and mirror: Checks dark, hard to reach areas like the roof void and subfloor.
    "Moisture detection is what finds termites you cannot see. Activity behind a wall often shows up as a damp patch long before any visible damage."

    What does the written report include?

    Every termite inspection ends with a written report. This is the record of what was found and what it means. A Priority Pest Services report includes:

    1. Findings: Whether termites were found, where, and how active they are.
    2. Damage: Any visible damage to timber, with locations noted.
    3. Risk areas: Conditions that encourage termites, such as moisture, timber touching soil or poor ventilation.
    4. Limitations: Any areas that could not be inspected and why, such as a locked manhole or no subfloor access.
    5. Recommendations: The next steps, which may include treatment, a barrier or changes to reduce risk.

    Keep your reports. They let the technician track changes over time at your next inspection. Read our guide on how often to book a termite inspection to plan your schedule.

    What is not included in a termite inspection?

    A termite inspection is a visual, non-invasive check of accessible areas. It is important to know what it does not do.

    • It does not guarantee termites are absent from concealed or inaccessible areas.
    • It does not include cutting into walls or lifting fixed floorboards.
    • It does not include treatment. If termites are found, treatment is quoted separately.
    • It is not the same as a full building inspection. It focuses on timber pests, not all structural defects.

    If you are buying a property, you may need a separate building inspection as well. See our home inspection service for a pre-purchase report that covers termites and other pests.

    How long does a termite inspection take?

    A standard 3-bedroom home takes about 1 to 1.5 hours. Larger homes, properties with poor access, or homes with a lot of garden timber take longer. The time on site is part of the price, not an extra charge. Read our guide on termite inspection costs for what you can expect to pay.

    We provide termite inspections in the Hills District, termite inspections in the Northern Beaches and termite inspections in the Sutherland Shire, plus every other part of Greater Sydney.

    What happens if termites are found?

    If the inspection finds termites, do not disturb them. The report will set out the options, which may include baiting, a chemical barrier or a full termite treatment. We explain the options and quote before any work starts. Disturbing termites causes the colony to retreat and spread, which makes treatment harder. See our guide to the signs of termites and what to do next for the steps to take.

    Key tips to get a thorough inspection

    • Clear access to the manhole and subfloor before the visit.
    • Move stored items away from the slab edge and exterior walls.
    • Tell the technician about any signs you have noticed, such as mud tubes or tight doors.
    • Keep your reports so changes can be tracked over time.

    Want to know what is really in your walls?

    Priority Pest Services provides licensed termite inspections from $200 across Greater Sydney, with a full written report and no callout fees. Call us or request a free quote online to book today.

    Call 0466 344 445 Get a free quote

    Frequently Asked Questions

    What areas does a termite inspection cover?

    The interior, exterior, roof void, subfloor and garden where accessible. A thorough inspection checks all of these, not just the living areas.

    Do you use moisture meters?

    Yes. Moisture detection is a standard part of the inspection. It finds damp areas behind walls and skirting boards where termites may be active.

    Will I get a written report?

    Yes. Every inspection includes a written report with findings, damage, risk areas, limitations and recommendations.

    Does the inspection include treatment?

    No. The inspection finds out whether termites are present. If they are, treatment is quoted separately before any work starts.

    How long does a termite inspection take?

    A standard 3-bedroom home takes about 1 to 1.5 hours. Larger homes or properties with poor access take longer.